Air Nozzles & Jets
Air Nozzles will reduce your compressed air use and save you money
If you are currently using simple open pipes or nipples or drilled pipes an air nozzle installed will save you money. Replacing the open pipes with an air nozzle you will reduce the compressed air that you currently use since the air nozzles entrain surrounding air and amplify it. Use less compressed air and get better results. The vortex air nozzle delivers flow rates up to 25 times greater than the compressed air that they use. Our vortex air nozzles reduce the noise level since they use less air. Additional compressor capacity can be delayed or often eliminated totally which will save you money.
"Go Green" Replace Open Pipes with Our Air Saving Nozzles
A single 1/4 diameter open air jet on a open air line can consume the entire output of a 25 HP compressor at 100 psig.
How Our Vortex Air Nozzles Work
Compressed air is released through an annular orifice which reaches sonic speed. This creates a low pressure area which draws in surrounding air to amplify the total flow of the air nozzle. The design of our vortex air nozzles maximizes the speed of the primary compressed air enabling our vortex air nozzles to entrain large volumes of surrounding air to do an equal job to open compressed air jets and pipes.
FEATURES
• ADJUSTABLE
• R.O.I. IN WEEKS
• NO MOVING PARTS
BENEFITS
• EASY TO CONTROL
• LOW INITIAL COST
• LOW AIR CONSUMPTION-HIGH THRUST
• REDUCES COMPRESSED AIR USE
• MEETS OSHA SPECIFICATIONS• ELIMINATES NEED FOR ADDITIONAL COMPRESSORS
USES OF A VORTEX AIR NOZZLE
• BLOWOFF FOR CHIPS
• REPLACEMENT OF OPEN JETS
Jets
High thrust jet nozzles will reduce your compressed air usage
High thrust jet nozzles entrain the surrounding air providing a powerful air flow compared to open pipes. Vortex High Thrust Jets amplify compressed air by as much as 25 times. The high thrust provided enables the user to complete heavy blowoff jobs and heavy air conveying jobs without overloading the compressor or shortening the life of the compressor.
HOW DO VORTEX HIGH THRUST JETS WORK?
Vortex High Thrust Jets release a small amount of compressed air through an annular orifice. The high speed air creates a sonic velocity tube of air. The high speed tube of sonic velocity air creates a low pressure area or vacuum area at the rear of the jet body and entrains surrounding air into the sonic velocity air stream providing a high thrust air stream of air to provide high pressure blowoff.
AMPLIFY AIR FLOWS 25:1
FEATURES
• HIGH THRUST
• LOW CONSUMPTION
• CONTROLLABLE
BENEFITS
• RETURN ON INVESTMENT
• INSTANT ON AND OFF
• MEETS OSHA REQUIREMENTS
USES OF A VORTEX HIGH THRUST JETS
• HEAVY BLOWOFF
• EJECTING PARTS
• AIR CONVEYING
• PART CLEANING
• COOLING
• DRYING OFF SURFACES
• BLOWOFF OF CHIPS, TRIMS, AND SCRAP
• REPLACEMENT OF PIPES AND TUBES